Question 188General Subjects - Assistant Engineer
70% to passWhich of the following statements will be true if the position of the manual control lever, shown in the illustration, remains unchanged after the pump is placed on stroke? Illustration GS-0039
AAlthough oil will leak past part 'B', the amount of pump stroke will be maintained until the control handle position is changed.
BAlthough the control handle position was set, the pump displacement will fluctuate from zero to maximum flow rate until the handle is placed in its neutral position.
CRegardless of the control handle position, the pump will gradually move to full stroke.
DRegardless of the control handle position, the pump will gradually return to neutral stroke.
AI Explanation
The correct answer is A) Although oil will leak past part 'B', the amount of pump stroke will be maintained until the control handle position is changed. This is correct because, in a hydraulic system, if the manual control lever position remains unchanged, the pump stroke will be maintained even if there is some internal leakage (oil leaking past part 'B'). The pump displacement will not fluctuate (as stated in option B) or gradually move to full or neutral stroke (as stated in options C and D) unless the control handle position is changed. The other options are incorrect because they do not accurately describe the behavior of the hydraulic system when the manual control lever position remains unchanged.
Related Questions
Q3:The emergency bilge suction valve is typically used _______________. Q336:An 8" diameter wheel is driving a 20" diameter wheel via a pair of belts. The po... Q81:Which bearing will carry the load on two small points diametrically opposite to ... Q388:Water leaking from a pump packing gland is kept away from the bearing housing by... Q589:For a typical diesel engine jacket water cooling system, what location would be ...
Ready to test your knowledge?
Take a General Subjects - Assistant Engineer Practice ExamOfficial Resources