Question 1060Deck General70% to pass
When measuring the oxygen content of the cargo tanks prior to loading cargoes requiring vapor recovery, check it _______________.
AI Explanation
The correct answer is C) one half the ullage of the tank and one meter below the tank top.
This is the correct answer because, as per the regulations, when measuring the oxygen content of cargo tanks prior to loading cargoes requiring vapor recovery, the measurements should be taken at one half the ullage of the tank and one meter below the tank top. This ensures that the oxygen content is checked at the critical points in the tank where any potential hazardous vapors may accumulate.
The other options are incorrect because they do not align with the regulatory requirements. Option A is too broad, Option B focuses on the wrong locations, and Option D does not include the measurement at one meter below the tank top.
Related Questions
#1058 In accordance with U.S. regulations, no vessel can come or remain alongside a tank vessel while it is loading A, B, or C grade cargo without permission from whom? #1059 You are towing a 1,000 GT gasoline tank barge which is not gas free. By regulation, cargo tank hatches, ullage holes, and Butterworth plates on the barge may _______________.#1061 You are loading 475,000 barrels of cargo oil. At 0800 on 8 July, you find that you have loaded 174,000 barrels. At 1000, you find that you have loaded 192,000 barrels. If you continue loading at the same rate, you will finish at approximately _______________.#1062 In special cases, the Commandant of the Coast Guard may permit cargo piping to pass through machinery spaces. This is permitted provided that the only cargo carried through such piping is(are) which of the following? #1063 According to U.S. regulations, access to a cargo pumproom in a tank vessel carrying grades C or D liquid cargo must be which of the following?