Question 4023Deck General70% to pass
You are planning to anchor in an area where several anchors have been lost due to fouling. As a precaution, you should _______________.
AI Explanation
The correct answer is D) fit a crown strap and work wire to the anchor.
In areas where anchors have been lost due to fouling, using a crown strap and work wire on the anchor can help prevent it from getting stuck or lost. The crown strap connects the anchor shank to the rode, while the work wire provides an additional attachment point to help lift the anchor if it becomes fouled. This setup increases the chances of being able to retrieve the anchor, which is crucial in an area with a history of lost anchors.
The other options are not as effective in this scenario. Increasing the anchor scope (A) or using a stern anchor (C) do not directly address the issue of anchor fouling. Deploying both anchors (B) does not provide the additional security of the crown strap and work wire.
Related Questions
#4021 While heaving in the anchor prior to entering the wildcat you observe three white links on each side of a blue link. What does this indicate? #4022 A vessel traveling down a narrow channel, especially if the draft is nearly equal to the depth of the water, may set off the nearer side. This effect is known as _______________.#4024 The part of a windlass which physically engages the chain during hauling or paying out is the _______________.#4025 Using a scope of 6, how much cable would have to be used in order to anchor in 24 feet of water? #4026 The holding capability of an anchor is primarily determined by the _______________.