Question 4304Deck General70% to pass
Grinding to eliminate shallow surface defects should be done _______________.
AI Explanation
The correct answer is A) parallel to the longitudinal direction of the chain.
When grinding to eliminate shallow surface defects on an anchor chain, it is important to do so parallel to the longitudinal direction of the chain. This helps maintain the structural integrity of the chain links by avoiding creating perpendicular or diagonal grooves that could weaken the chain. Grinding perpendicular or diagonally across the chain links, as described in options C and B, could potentially compromise the strength and reliability of the anchor chain.
The other options, grinding diagonally across the link (B) or around the circumference of the chain link (D), are incorrect as they do not properly address the objective of eliminating shallow surface defects while preserving the chain's structural integrity.
Related Questions
#4302 The DEEP DRILLER is loaded as shown in Sample Load Form #4 (Drilling). While the unit is deballasting, starboard valve 17 fails in the closed position. You may deballast from tank 8S by pumping from tank 9S and opening valves 18 and _______________. #4303 When taking soundings on a floating MODU, the tape should be lowered and brought back quickly to _______________.#4305 If the result of loading a MODU is an increase in the height of the center of gravity, there will always be an increase in the _______________.#4306 While in ocean transit, the COASTAL DRILLER experiences a single amplitude roll of 5 degrees. What is the minimum roll period that does not exceed the design limits of the legs? #4307 The COASTAL DRILLER, elevated in 200 feet of water, has two knots of current and 70 knot winds. With a maximum leg reaction of 5,840 kips, the maximum wave height for drilling is _______________.