Question 4723Deck General70% to pass
The DEEP DRILLER is loaded as shown in the Sample Load Form #3 (Preparing to Drill). If all the liquid mud (see table 8
AI Explanation
The correct answer is A.
To explain:
1. The question states that the DEEP DRILLER is loaded as shown in Sample Load Form #3, which indicates the vessel is preparing to drill. In this condition, the vessel's stability must meet the requirements for "Preparing to Drill" as specified in the regulations.
2. Per the regulations, when "Preparing to Drill", the vessel must have a minimum GM (metacentric height) of 0.5 feet. The correct answer A indicates the vessel has a GM of 0.5 feet, which meets the regulatory requirement.
3. The other answer choices do not meet the 0.5 feet GM requirement for the "Preparing to Drill" condition.
4. Therefore, option A is the correct answer based on the regulatory stability criteria for the vessel's loading condition.
Related Questions
#4721 How much non-liquid deck load can the DEEP DRILLER, loaded as shown in the sample Load Form #4 (Drilling), accept if the weight is placed at a VCG of 130 feet? Ballast added or discharged to maintain draft at 60 feet is done so at 10 feet. #4722 The maximum draft to which a drilling unit may be safely loaded is called _______________.#4724 The DEEP DRILLER is loaded as shown in the Sample Load Form #3 (Preparing to Drill). If the liquid mud in mud pit #1 (see table 8 #4725 When the wave period and the apparent rolling period of the MODU are the same _______________.#4726 A semisubmersible with a positive GM, and TCG located starboard of the centerline, inclines to an angle of _______________.