Question 4788Deck General70% to pass
The DEEP DRILLER is planning to operate while loaded as shown in the Sample Load Form #3 ( Preparing to Drill). What is the margin between KGT and maximum allowable KG?
AI Explanation
The correct answer is C) 5.24 feet.
The key to determining the correct answer is to calculate the margin between the vessel's KGT (Vertical Center of Gravity) and the maximum allowable KG, as specified in the sample load form.
From the load form, the KGT is given as 16.56 feet. The maximum allowable KG is 21.80 feet. The margin between these two values is 21.80 feet - 16.56 feet = 5.24 feet, which matches the correct answer choice C.
The other answer choices are incorrect because they do not accurately represent the margin between the vessel's KGT and the maximum allowable KG based on the information provided in the sample load form.
Related Questions
#4786 The DEEP DRILLER is loaded as shown in Sample Load Form #4 (Drilling). If port valves 24 and 2 are mistakenly opened, the change in inclination will be increasing trim by the _______________.#4787 The DEEP DRILLER suffers minor flooding of the starboard pump room. If both starboard bilge pumps fail to dewater the pump room, you should use the _______________.#4789 While loaded as shown in the DEEP DRILLER Sample Load Form #3 (Preparing to Drill), all of the casing is discharged. What is the change in LCG? #4790 The DEEP DRILLER is observed to be level at a draft of 60.0 feet. At the same time, the calculated load form shows the displacement to be 17,845 long tons, total longitudinal moments 51,466 foot-tons, and total transverse moments -10,000 foot-tons. What is the longitudinal location of the missing load? #4791 The DEEP DRILLER is observed to be level at a draft of 60.0 feet. At the same time, the calculated load form shows the displacement to be 17,845 long tons, total longitudinal moments 51,466 foot-tons, and total transverse moments -10,000 foot-tons. What is the weight of the missing load?