Question 4920Deck General70% to pass
Considering the changes to lightweight shown in Section 5 of the COASTAL DRILLER Manual, with the rotary 36 feet aft of the transom and 4 feet to port of the centerline, and with 300 kips in the setback, the maximum hook load is limited to _______________.
AI Explanation
The correct answer is D) 314 kips.
The explanation is as follows:
1. The correct answer is D) 314 kips, as this represents the maximum hook load limit based on the given information from the COASTAL DRILLER Manual.
2. According to the manual, with the rotary 36 feet aft of the transom and 4 feet to port of the centerline, and with 300 kips in the setback, the maximum hook load is limited to 314 kips. This is the result of the calculations and regulations outlined in the manual.
3. The other options are incorrect because they do not accurately reflect the maximum hook load limit based on the provided information and the manual's guidelines.
Related Questions
#4918 A jack-up level at 12.5 feet draft transfers 100 kips of drill water from a tank with a TCG of -30 feet to a starboard tank with a TCG of 70 feet. The resulting starboard draft is 13 feet. The moment required to change list one inch (MCL1") is _______________.#4919 Drilling loads on the COASTAL DRILLER are the combined loads arising from conductor tension, rotary, hook, and _______________.#4921 For operations in pack ice, a vessel should _______________.#4922 While in ocean transit at a draft of 10 feet, the Coastal Driller has a maximum allowed KG of _______________.#4923 An icebreaker assisting a vessel through an ice field would display a visual signal consisting of the code letter "M" (Mike) to signify that "_______________".