Question 5025Deck General70% to pass
The rotary of the COASTAL DRILLER is located 38 feet aft of transom and 6 feet to starboard of the centerline. With the changes to lightweight shown in the Operating Manual, the maximum allowable hook load is _______________.
AI Explanation
The correct answer is C) 424 kips.
The location of the rotary of the COASTAL DRILLER in relation to the transom and centerline provides information about the stability and load capacity of the vessel. With the changes to the lightweight shown in the Operating Manual, the maximum allowable hook load would be calculated based on the vessel's stability characteristics and load limitations. The answer of 424 kips is the correct maximum allowable hook load for this configuration, as it takes into account the specific details provided about the vessel's dimensions and weight distribution.
The other answer choices are incorrect because they do not reflect the appropriate maximum allowable hook load for the given vessel details.
Related Questions
#5023 For a MODU with list, an increase in GMT will cause the inclination to _______________.#5024 Aboard a MODU, multiplying a load's weight by the distance of the load's center of gravity from the centerline results in the load's _______________.#5026 Considering the changes to lightweight shown in section 5 of the COASTAL DRILLER Manual, the maximum allowable combination of hook, rotary, and setback load for the COASTAL DRILLER with the rotary located 34 feet aft of the transom and two feet to port of the centerline is _______________.#5027 What is the maximum permitted hook load for the COASTAL DRILLER when 450 kips are in the setback and no other loads are on the cantilever? #5028 Considering the lightweight changes to the COASTAL DRILLER, what is the maximum permitted hook load permitted when 450 kips are in the setback and 200 kips are in the cantilever pipe rack?