Question 932Deck General70% to pass
Before a tank is to be crude oil washed, the oxygen content in the tank must be measured at a position _______________.
AI Explanation
The correct answer is B) one meter from the deck.
Before a tank is crude oil washed, the oxygen content in the tank must be measured at a position one meter from the deck, as per the relevant regulations. This is because the area one meter from the deck is considered the most representative location to measure the oxygen level, as it is away from potential pockets of low oxygen near the top of the tank, but still close enough to the main body of the tank contents.
The other options are incorrect because: A) the vent riser may not be representative of the tank atmosphere; C) the top of the tank may have lower oxygen levels due to stratification; and D) immediately above the oil level may not be the most representative position.
Related Questions
#930 An inert gas system installed on a tanker is designed to _______________.#931 To insure proper seating when closing a valve on a tank, what position should the valve be in? #933 A cargo of oil has a coefficient of expansion of .0005 per degree F. If this cargo is loaded at 70°F, and a cargo temperature of 90°F is expected at the discharge port, how many barrels would you expect to unload if you loaded 10,000 barrels? #934 Who must supervise functions aboard a tanker or tank barge such as connecting, disconnecting, and topping off? #935 You have completed a crude oil wash. What action should be taken with the oil in the lines running to the washing machines?