Question 798Deck Safety70% to pass
When water pressure of 100 psi is used in conjunction with an inline proportioner for the production of the mechanical foam, a 5-gallon can of liquid foam will last _______________.
AI Explanation
The correct answer is A) 1-1/2 minutes.
When an inline proportioner is used with a water pressure of 100 psi, a 5-gallon can of liquid foam will last approximately 1-1/2 minutes. This is based on the typical flow rate and proportioning ratio of an inline proportioner designed for mechanical foam production. The higher water pressure of 100 psi allows the proportioner to rapidly draw the liquid foam concentrate and mix it with the water, resulting in a shorter duration for a 5-gallon can.
The other answer choices are incorrect because:
B) 2-1/2 minutes is too long for a 5-gallon can at 100 psi.
C) 5 minutes is also too long for a 5-gallon can at 100 psi.
D) 15 minutes is significantly too long and not realistic for a 5-gallon can at 100 psi.
Related Questions
#796 Which type of fire is the foam (stored-pressure type) fire extinguisher effective on? #797 In the production of chemical foam by a continuous-type generator _______________.#799 Production of mechanical foam by a portable in-line foam proportioner _______________.#800 Compared to the amount of concentrated foam liquid used, the amount of low expansion mechanical foam produced is _______________.#801 One gallon of low expansion foam solution will produce about _______________.