Question 244Electricity/Electronics - Assistant Engineer70% to pass
In accordance with 46 CFR, Subchapter J (Electrical Engineering), each diesel engine driven generator prime mover must have an overspeed device, independent of the normal operating governor. If in testing the overspeed device, what should be the trip point setting in terms of rated speed?
AI Explanation
The correct answer is B) not to exceed 15% above rated speed.
According to 46 CFR Subchapter J, each diesel engine driven generator prime mover must have an overspeed device that is independent of the normal operating governor. The regulations specify that the overspeed trip point setting should not exceed 15% above the rated speed of the engine. This is to ensure that the overspeed protection is activated at a safe limit to prevent potential damage or failure of the engine and generator system.
The other options are incorrect because they do not align with the regulatory requirement. Setting the overspeed trip point higher than 15% above rated speed would not provide adequate protection against engine overspeed events.
Related Questions
#242 What material are the plates of a wet cell NiCad storage battery made of? #243 Assuming that a ship's service generator is directly coupled to the prime mover, what condition must cause a prime mover to automatically shutdown? #245 You are in the planning stages of setting the instantaneous trip of a ship's service generator circuit breaker. According to 46 CFR, Subchapter J (Electrical Engineering), what statement is true regarding the criteria for the instantaneous trip setpoint, assuming the generator is capable of being paralleled? #246 There are very specific rules that govern the testing of generators found in the appropriate publication incorporated by reference. According to 46 CFR, Subchapter J (Electrical Engineering), which agency publishes the rules for the construction and testing of generators? #247 You are in the planning stages of setting the longtime overcurrent trip of a ship's service generator circuit breaker. According to 46 CFR, Subchapter J (Electrical Engineering), what statement is true regarding the criteria for the longtime overcurrent trip setpoint, assuming the generator is capable of being paralleled?