Question 74Electricity/Electronics - Assistant Engineer70% to pass
As shown in the illustrated plots of uncorrected and temperature corrected insulation resistance readings for a particular piece of equipment, at what point in time should the equipment have been refurbished or replaced? Illustration EL-0120
AI Explanation
The correct answer is D) no refurbishment or replacement was necessary through 2011.
The plots show that the uncorrected insulation resistance readings remained well above the minimum acceptable level throughout the period from 2006 to 2011. The temperature-corrected readings also showed no significant decline over this time. Based on this data, there was no indication that the equipment required refurbishment or replacement during this period, as the insulation resistance levels remained satisfactory. The other answer choices (2006, 2008, 2010) are incorrect because the data does not suggest the equipment needed attention at those specific times.
Related Questions
#72 When shore power is being connected to a ship in drydock, what must be ensured, assuming that the ship's generators are rated at 450 VAC, 60 Hz with a total capacity of 5000 kW? #73 When paralleling two alternators the synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. What does this indicate? #75 When testing insulation resistance of electric equipment and machinery, ideally when should the insulation resistance be tested for the lowest normal insulation values? #76 When regreasing the electric motor bearing as shown in figure "B" of the illustration, what practice should be avoided? Illustration EL-0218 #77 What would be the indication of a grounded switch or cable as measured by a megohmmeter?