Question 31General Subjects - Assistant Engineer70% to pass
The main bearings of a reciprocating air compressor are tapered roller bearings. When mounted, these bearings are given a 'cold' end clearance to _______________.
AI Explanation
The correct answer is A) allow for longitudinal expansion of the crankshaft as the unit warms up.
Tapered roller bearings used in the main bearings of a reciprocating air compressor are designed with a 'cold' end clearance to accommodate the longitudinal expansion of the crankshaft as the engine warms up during operation. This end clearance allows the crankshaft to expand without binding or putting excessive stress on the bearings.
The other options are incorrect because: B) torsional vibration is not the primary reason for the end clearance, C) the end clearance is not to prevent longitudinal thrust, and D) the clearance is not specifically for crank web deflection.
Related Questions
#29 If the drive belts on an air compressor were squealing during startup, you should _______________.#30 If one drive belt on an air compressor is found to be worn you should _______________.#32 After disassembly, the safest way to remove carbon deposits from air compressor inlet and discharge valves is to use _______________.#33 How often should the air receivers on a compressed air system be drained of moisture and emulsions? #34 When checking the oil level on a reciprocating air compressor fitted with a dipstick, under what conditions should the oil level be checked?