Question 19General Subjects - 1st Asst/Chief70% to pass
One of the consequences in continuing to operate a centrifugal bilge pump with the discharge valve closed, is that the _______________.
AI Explanation
The correct answer is A) the pump will overheat.
When a centrifugal bilge pump is operated with the discharge valve closed, the pump will continue to circulate the water within the pump housing. This causes the water to heat up, leading to the pump overheating. The pump's impeller is unable to discharge the water, and the internal recirculation of the water results in excessive friction and heat buildup within the pump.
The other options are incorrect because: B) the relief valve would only open if the system was designed with one, C) the motor overload would not open unless the motor was drawing excessive current due to the pump overheating, and D) the motor would overheat as a result of the pump overheating, not as a direct consequence of the closed discharge valve.
Related Questions
#17 Salt water ballast is to be discharged into the No.6 port and starboard wing tanks. Which combination of valves illustrated, must be opened, and which valves should be closed? Illustration GS-0139 #18 In order to take suction on the lube oil drain tank cofferdam with the bilge pump shown in the illustration, how many suction side valves must be open? Illustration GS-0042 #20 The emergency bilge suction valve is typically used _______________.#21 Accidental flooding of the engine room bilges through the bilge system is prevented by _______________.#22 As routine maintenance, the bilge manifold valves are periodically removed and examined. Prior to re-securing the valve bonnets, the valve _______________.