Question 252General Subjects - 1st Asst/Chief70% to pass
Prior to arrival in Charleston, SC your vessel must conduct drills within 48 hours prior to entry and log that in the vessel logbook. Alternatively, you can log regularly scheduled quarterly drills according to 33 CFR regulations governing ports and waterways safety. Which of the following are included in the drills that must be performed?
AI Explanation
The correct answer is C) Operation of the alternative power supply for the steering gear, if the vessel is so equipped.
The reasoning for this is that the regulations in 33 CFR require vessels to conduct drills that test the operation of the alternative power supply for the steering gear, if the vessel is equipped with one. This is to ensure the vessel can maintain steering control in the event of a main power failure.
The other options, while important for overall vessel safety, are not specifically required as part of the drills prior to entry into the port of Charleston under the 33 CFR regulations. The operation of the main steering gear and communications between the bridge and steering compartment are important, but not directly mandated for these particular drills.
Related Questions
#250 Prior to entering the navigable waters of the United States after an international voyage, your vessel must conduct drills according to 33 CFR regulations for ports and waterways safety that test steering system functionality and log that in the vessel logbook, unless the drill is conducted and logged on a regular basis at least once every three months. Within how many hours of arrival must these drills be performed? #251 Prior to entering the navigable waters of the United States after an international voyage, your vessel must conduct drills according to 33 CFR regulations for ports and waterways safety that test steering system functionality and log that in the vessel logbook, unless the drill is conducted and logged on a regular basis at least once every three months. Which of the following functions must be tested for? #253 Machinery spaces must be designed to minimize the exposure of personnel to noise in accordance with U.S. regulations. Machinery control room noise must not exceed which noise level? #254 Various tests while conducting a fuel oil analysis can be performed on board to facilitate proper centrifugation. What test provides the key data for selecting the correct purifier gravity disk for fuel oil centrifugal purifiers? #255 Compatibility of fuel is easily checked onboard ship to insure that serious problems do not result. What statement concerning fuel incompatibility is true?