Question 156General Subjects - QMED70% to pass
If the distances "A" and/or "B" as shown in the illustration are excessively increased, the tool will _______________. Illustration GS-0085
AI Explanation
The correct answer is C) chatter.
If the distances "A" and/or "B" as shown in the illustration are excessively increased, the tool will be more susceptible to chatter. Chatter is an undesirable vibration that can occur in machining operations, which can negatively affect the surface finish and dimensional accuracy of the workpiece. Increasing the distances "A" and/or "B" reduces the tool's rigidity, making it more prone to vibration and chatter during the cutting process. The other answer choices are incorrect because they do not accurately describe the effect of excessively increasing the tool's distances "A" and/or "B".
Related Questions
#153 To properly cut even numbered threads using the lathe thread dial indicator shown in the illustration, you should close the lathe split or half-nut on_______________ Illustration GS-0084 #155 Two separate work pieces are to have a taper cut with the same taper per inch, using the offset tailstock method. After the first piece is completed, the tailstock offset must be changed if there is a change in the _______________.#157 A work piece has been mounted between centers and a test cut machined at each end to check alignment of the lathe centers. If the test cut on the tailstock end is deeper than the test cut on the headstock end, the tailstock must be moved _______________.#158 When a lathe is used for thread cutting, the number of threads per inch produced is determined by the speed relationship between the _______________.#159 To commence cutting threads with a metal lathe, you should engage the _______________.