Question 205Motor Plants - Assistant Engineer70% to pass
How is the illustrated strainer element cleaned during engine operation? Illustration MO-0057
AI Explanation
The correct answer is C) The T-handle is rotated.
The illustrated strainer element is typically cleaned during engine operation by rotating the T-handle on the strainer housing. This allows the strainer element to be cleaned without shutting down the engine or removing the housing. Rotating the T-handle opens the strainer to the flow of fuel or oil, allowing contaminants to be flushed out while the engine is running. This is the standard procedure for cleaning this type of strainer element without disassembly.
The other answer choices are incorrect because they describe more involved procedures that would require shutting down the engine. Draining the housing (A) or fully removing and cleaning the element (B, D) are not the typical method for cleaning this type of strainer during normal engine operation.
Related Questions
#203 If the analysis of used lube oil indicates a high content of iron particles, this could indicate _______________. #204 A magnetic strainer is primarily used in diesel engine reduction gear oil systems to remove small particles of_______________. #206 A spring-loaded relief valve is located on some lube oil filters in full flow systems to _______________. #207 Most large main propulsion diesel engines use a duplex lube oil strainer to _______________.#208 Where would a coarse screen wire mesh strainer normally be found on a diesel engine lubrication system?