Question 418Motor Plants - Assistant Engineer70% to pass
After following the prescribed procedures to measure the thrust bearing clearance shown in the illustration, the distance "F" is determined to be 200 mm, and 'f1' is 2.3 mm. Which of the following statements describes the condition indicated by these dimensions? Illustration MO-0121
AI Explanation
The correct answer is B.
These dimensions indicate that the shaft is able to move axially 2.3 mm during astern operation, which is 1.3 mm more than the maximum worn play typically allowed. This excess axial movement of the shaft suggests potential issues with the thrust bearing clearance and requires further inspection or adjustment to bring it within the recommended specifications.
The other answer choices are incorrect because:
A) Flourishing marks on the thrust shoes are not directly indicated by the given dimensions.
C) The loading ratio is not provided, so this statement cannot be verified.
D) The total active thrust area of 202.3 mm does not necessarily fall within any specific standards without more context.
Related Questions
#416 When installing the bearing cap on the device shown in the illustration, which of the precautions listed must be observed? Illustration MO-0121 #417 What is the normal bearing clearance permitted at the horizontal axis of the shaft for the bearing shown in the illustration? Illustration MO-0121 #419 The spray holes in diesel engine fuel valves should be cleaned using carbon solvent and_______________. #420 When running a large, dual fuel, main propulsion diesel engine on heavy fuel, which of the following precautions should be observed when switching from heavy fuel oil to diesel oil? #421 Air is normally bled from a diesel engine fuel system by _______________.