Question 86Motor Plants - 1st Asst/Chief70% to pass
Heavy fuel oils generally have an upper average ash content of 0.1% by weight. Which of the following conditions could be expected if the ash content increases above this amount?
AI Explanation
A) Increased exhaust valve wear is the correct answer.
Heavy fuel oils with ash content above 0.1% by weight can lead to increased exhaust valve wear. The ash content in the fuel can cause abrasive wear on the exhaust valves, leading to faster deterioration and requiring more frequent valve replacements. This is due to the ash particles acting as an abrasive on the valve surfaces during combustion.
The other options are incorrect because:
B) Increased MEP (mean effective pressure) is not a direct consequence of higher ash content.
C) Excessive bearing wear is not a typical issue caused by increased ash in heavy fuel oils.
D) Glazing of the cylinder liners is not a common problem related to elevated ash levels in the fuel.
Related Questions
#84 A bronze bearing liner with a lead-tin flashing has a milky-white color over most of its surface and some areas of exposed bronze. The white coloring indicates _______________.#85 While underway, a slow-speed diesel engine lube oil sump level slowly begins to decrease. Which of the following should be checked? #87 On a slow-speed, diesel-propelled vessel operating with constant slip, what is the effect on fuel consumption with an increase in shaft RPM? #88 While bunkering heavy fuel, what quick/easy test can one perform onboard to determine the compatibility of 'old' with 'new' fuel? #89 You are onboard a vessel with a slow-speed crosshead type engine. The fuel just received has a significantly lower sulfur content than the previous bunkers. Which of the following would be a concern due to the reduced sulfur content?