Question 141Refrigeration/AC - Assistant Engineer70% to pass
During tests to discover why a refrigeration compressor is running continuously, it is determined that the refrigerated space temperature is slightly above normal without ever reaching the desired minimum temperature. Suction and discharge pressures are normal for the corresponding box temperature. In this situation, what should you suspect?
AI Explanation
The correct answer is B) leaking door gaskets.
Explanation:
If the refrigerated space temperature is slightly above normal without reaching the desired minimum temperature, and the suction and discharge pressures are normal, this suggests that the issue is not related to the refrigeration system itself. Instead, the most likely cause is a problem with air infiltration, which can occur due to leaking door gaskets. Leaky door gaskets allow warm outside air to enter the refrigerated space, preventing the system from reaching the desired temperature, even though the refrigeration components are functioning normally.
The other options are less likely in this scenario. Air in the system (A) would likely cause abnormal pressures, a shortage of refrigerant (C) would result in low suction pressure, and high cooling water temperature (D) would affect the discharge pressure, none of which are indicated in the problem description.
Related Questions
#139 Excessive moisture being collected in the purge unit of a low-pressure refrigeration system could indicate which probable condition? #140 An evaporator coil of a single evaporator, air-cooled refrigerator is accumulating excessive frost due to a failure of the defrost mechanism. If the refrigerator features a thermostatically controlled box solenoid and a low-pressure cutout controlled compressor, as well as a high-pressure cutout, in terms of the compressor, what would be the most likely operating symptom? #142 As shown in figure "B" of the illustrated self-contained recovery unit connection diagrams, what is the recovery method supported by the connection scheme? Illustration GS-RA-33 #143 In a refrigeration system, the push-pull technique can be used for the recovery of the refrigerant in what state? #144 What is the correct color-coding of refrigerant recovery cylinders regardless of the refrigerant contained within?