Question 243Safety & Environmental - 1st Asst/Chief70% to pass
What would be the minimum distance from any shoreline that a vessel must be located before it is permitted to perform a complete ballast water exchange to be in compliance with U.S. Federal Ballast Water Management Regulations?
AI Explanation
The correct answer is D) 200 nautical miles.
The U.S. federal ballast water management regulations require vessels to conduct a complete ballast water exchange at least 200 nautical miles from any shoreline before discharging ballast water in U.S. waters. This requirement is in place to help prevent the introduction and spread of invasive aquatic species by requiring ballast water to be exchanged in the open ocean, where the water is less likely to contain organisms that could become harmful in a new environment.
The other options are incorrect because they do not meet the 200 nautical mile requirement specified in the regulations. 12 nautical miles, 50 nautical miles, and 100 nautical miles are all shorter distances that would not be sufficient to comply with the federal ballast water management standards.
Related Questions
#241 A segregated ballast system is a system where _______________.#242 When discharging clean ballast, prior to entering the loading port, if the ballast is determined by the oil monitor to exceed 15 parts per million of oil, the deballasting must _______________.#244 When a rescue vessel approaches a survival craft in heavy seas, the person in charge of the survival craft should _______________.#245 An 'on-load' release system on a survival craft means the cable can be released _______________.#246 If the survival craft is not loaded to full capacity, the personnel should be _______________.