Question 12Steam Plants - Assistant Engineer70% to pass
A basic comparison can be made between a low-pressure evaporator operation and a main condenser with regards to the removal of non-condensable gases. The vacuum drag line for the main condenser is specifically connected in which area?
AI Explanation
The correct answer is D) air cooler section.
The vacuum drag line for the main condenser is specifically connected to the air cooler section. This is because the air cooler section is where non-condensable gases, such as air, are removed from the main condenser. The vacuum drag line helps to draw these non-condensable gases out of the condenser, preventing them from building up and reducing the overall efficiency of the system.
The other options (A, B, and C) are incorrect because they do not represent the specific location where the vacuum drag line is connected to remove non-condensable gases from the main condenser.
Related Questions
#10 Fuel oil solenoid valves at the burner fronts should be of the manual reset type to _______________.#11 From which of the areas listed are condensate drains normally collected and returned to the low-pressure drain system? #13 To properly remove the burner tip nut from the burner barrel, the barrel should be _______________.#14 A flue gas analysis is performed to determine the _______________.#15 A mechanical carbon dioxide recorder operates by detecting the difference between air and the _______________.