Question 391Steam Plants - Assistant Engineer70% to pass
A boiler water sample being collected for analysis should be circulated through a cooling coil because _______________.
AI Explanation
The correct answer is B) this keeps the water from flashing into steam as it is drawn from the higher pressure of the boiler into atmospheric conditions.
When a boiler water sample is drawn from the high-pressure boiler into the lower atmospheric pressure, the sudden drop in pressure can cause the hot water to rapidly convert to steam, known as "flashing." Passing the sample through a cooling coil helps to lower the temperature and prevent this flashing, allowing the sample to be safely collected for analysis.
The other answer choices are incorrect because they do not address the key issue of preventing flashing during the sample collection process.
Related Questions
#389 A sample of boiler water can be chemically tested for alkalinity by initially adding a few drops of phenolphthalein and then slowly titrating the water sample until the _______________.#390 What boiler water chemistry is necessary to ensure the precipitation of hard scale forming calcium? #392 A boiler with a water capacity of 10 tons generates steam at the rate of 30 tons per hour. If the feed water quality is 0.5 ppm, the concentration of solids will increase 1.5 ppm every hour. What would be the increase in the concentration of solids within 24 hours? #393 Phenolphthalein is used as an indicator to test boiler water for _______________.#394 The amount of sodium phosphate in treated boiler water can be measured by a/an _______________.