Question 376Steam Plants - 1st Asst/Chief70% to pass
The component labeled "II", as shown in the illustration is called the _______________. Illustration SE-0013
AI Explanation
The correct answer is D) high-speed pinion.
The high-speed pinion (labeled "II" in the illustration) is the smaller gear that meshes with the larger second reduction gear, which is the component that transfers power from the engine to the propeller shaft. This high-speed pinion is a critical part of the marine propulsion system, as it helps to step down the engine's high rotational speed to a lower speed more suitable for propelling the vessel.
The other answer choices are incorrect because they do not accurately describe the component labeled "II" in the illustration. The first reduction gear, second reduction pinion, and second reduction gear are different components within the marine propulsion system, but they are not the specific component shown as "II" in this particular illustration.
Related Questions
#374 The purpose of the main reduction gears is to _______________.#375 Regarding main reduction gears, when high speed first reduction pinions and gears are connected to low speed pinions and gears, each contained in a sequential portion of the gear housing, the reduction gear unit is known as _______________.#377 When a sudden increase in pressure occurs in a forced lubrication system, you should check for a _______________.#378 If a tube should leak in an operating main steam turbine lube oil cooler, the water will not immediately contaminate the oil because the _______________.#379 If a lube oil pump fails to build up discharge pressure, the cause could be the _______________.