Question 4333Deck General70% to pass
During storm conditions on a MODU, the mooring tensions should be adjusted so that _______________.
AI Explanation
The correct answer is C) the maximum tension of the most heavily loaded line does not exceed the safe working load.
During storm conditions on a MODU (Mobile Offshore Drilling Unit), the mooring tensions should be adjusted so that the maximum tension of the most heavily loaded line does not exceed the safe working load. This ensures that the mooring system can safely withstand the increased forces and stresses caused by the storm conditions, preventing the risk of mooring line failure and potential damage to the MODU.
The other options are incorrect because: A) maintaining equal horizontal and vertical tension forces is not the primary concern during storm conditions; B) having the leeward lines with higher tension than the windward lines is not the optimal configuration; and D) having all mooring lines with different tensions is not a specific requirement for storm conditions.
Related Questions
#4331 To effectively use the crossover system on the DEEP DRILLER to pump from the low side using a high side ballast pump, transverse inclinations should not exceed _______________.#4332 When threatened with a severe storm while operating in 250 feet of water, the COASTAL DRILLER should be placed at an air gap of _______________.#4334 On the DEEP DRILLER, among the valves to open when transferring ballast from Tank 1S to Tank 10P using the #1 ballast pump is valve _______________.#4335 When anchoring in an area with a soft bottom, the fluke angle of an anchor should be set at _______________.#4336 On the DEEP DRILLER, among the starboard-side valves to open when deballasting from ballast tank 2S is valve _______________.