Question 4334Deck General70% to pass
On the DEEP DRILLER, among the valves to open when transferring ballast from Tank 1S to Tank 10P using the #1 ballast pump is valve _______________.
AI Explanation
The correct answer is A) 33 Port.
When transferring ballast from Tank 1S to Tank 10P using the #1 ballast pump on the DEEP DRILLER, the valve that needs to be opened is 33 Port. This is because the valve numbers and locations are typically assigned based on the vessel's layout, with odd-numbered valves on the port side and even-numbered valves on the starboard side. Since Tank 1S is on the port side and Tank 10P is on the port side, the appropriate valve to open is 33 Port.
The other options are incorrect because 44 Port, 33 Starboard, and 44 Starboard would not be the correct valves to open for this specific ballast transfer operation.
Related Questions
#4332 When threatened with a severe storm while operating in 250 feet of water, the COASTAL DRILLER should be placed at an air gap of _______________.#4333 During storm conditions on a MODU, the mooring tensions should be adjusted so that _______________.#4335 When anchoring in an area with a soft bottom, the fluke angle of an anchor should be set at _______________.#4336 On the DEEP DRILLER, among the starboard-side valves to open when deballasting from ballast tank 2S is valve _______________.#4337 The distance from the still water level (corrected for tides and storm surge) to the bottom of the hull of a MODU is the _______________.