Question 4402Deck General70% to pass
When the height of the metacenter has the same value as the height of the center of gravity, the metacentric height is equal to _______________.
AI Explanation
The correct answer is B) zero.
When the height of the metacenter is the same as the height of the center of gravity, the metacentric height (GM) becomes zero. This is because the metacentric height is defined as the distance between the center of gravity (G) and the metacenter (M). If the heights of these two points are the same, then the distance between them is zero, resulting in a metacentric height of zero.
The other options are incorrect because: A) the height of the metacenter is not equal to the metacentric height when they are the same; C) the height of the center of gravity is not equal to the metacentric height in this scenario; and D) half the height of the metacenter is not the same as the metacentric height when it is zero.
Related Questions
#4400 The DEEP DRILLER is drilling at 60 feet draft at a corrected KG of 54.0 feet. Ballast added or discharged to remain at a constant draft is at a VCG of 10 feet. How much non-liquid load would have to be removed from an average height of 130 feet above the keel to meet the maximum allowable KG at a draft of 60 feet for winds greater than 70 knots? #4401 The DEEP DRILLER is planning to operate while loaded as shown in the Sample Load Form #3 ( Preparing to Drill). What is the margin between KGT and maximum allowable KG? #4403 The DEEP DRILLER is loaded as shown in the Sample Load Form #1 (Transit). What is the new height of the center of gravity corrected for longitudinal free surface effects if the entire contents of Salt Water Ballast Tanks 1P and 1S are discharged? #4404 Until a change to lightweight has been approved, the weights and moments shown in the Changes to Lightweight Record of the COASTAL DRILLER are treated as _______________.#4405 The DEEP DRILLER is operating as shown in Sample Load Form #4 (Drilling). Assume ballast added or discharged to remain at a constant draft is at a VCG of 10 feet. How much non-liquid load would have to be removed from an average height of 130 feet above the keel to meet the maximum allowable KG at a draft of 60 feet for winds greater than 70 knots?