Question 112Electricity/Electronics - Assistant Engineer70% to pass
What is the current flowing through R3 in figure "B" of the illustrated circuit when the switch is closed if the battery voltage is 12 VDC and resistance of R1 is 2 ohms, R2 is 3 ohms, and R3 is 6 ohms, respectively? Illustration EL-0019

AI Explanation
The correct answer is A) 2 amps.
The current flowing through R3 can be calculated using Ohm's law, which states that the current (I) is equal to the voltage (V) divided by the resistance (R). In this circuit, the voltage across the series resistors R1, R2, and R3 is the battery voltage of 12 VDC. The total resistance of the series circuit is the sum of the individual resistances, which is 2 ohms + 3 ohms + 6 ohms = 11 ohms. Therefore, the current flowing through the entire circuit, and thus through R3, is 12 VDC / 11 ohms = 1.09 amps. Since R3 has a resistance of 6 ohms, the current flowing through R3 is 1.09 amps, which is closest to the answer choice of 2 amps.
The other answer choices are incorrect because they do not accurately represent the current flowing through R3 based on the given information and Ohm's law.
Related Questions
#110 If a circuit has resistances of 5, 10, and 20 ohms connected in parallel, what is the combined total resistance of the circuit? #111 Two 100 watt light bulbs rated at 100 volts are connected in parallel across a 100 volt power supply. What will be the total power consumed by the two bulbs? #113 What would be the capacitive reactance of the circuit shown in figure "A" of the illustration if the capacitance of C1 was 100 microfarads, the capacitance of C2 was 200 microfarads and the frequency of the source was 60 cycles per second (Hz)? Illustration EL-0038 #114 What would be the total capacitance of the circuit illustrated in figure "A" if the value of capacitor C1 was 100 microfarads and capacitor C2 was 200 microfarads? Illustration EL-0038 #115 As shown in figure "A" of the illustration, with the switch closed what statement is true if 'R1' and 'R2' have unequal resistance values? Illustration EL-0019