Question 656General Subjects - Assistant Engineer70% to pass
Generally speaking, when using a twist drill to bore a hole in metal, the harder the metal, the greater the drill's required _______________.
AI Explanation
You are correct, the answer is A) included point angle.
The included point angle of a twist drill refers to the angle between the two cutting edges at the tip of the drill. For drilling harder metals, a larger included point angle is required to provide more clearance for the cutting edges and prevent the drill from binding or wandering in the hole.
The other options are incorrect because: B) cutting speed is not directly related to the hardness of the metal, C) the drill diameter is typically selected based on the desired hole size, and D) lip clearance is more related to the drill geometry rather than the workpiece material hardness.
Related Questions
#654 Before drilling a hole in a piece of metal, the location of the hole center should be _______________.#655 Failing to decrease the feed pressure on a drill as its point begins to break through the bottom of the work piece will cause the drill to _______________.#657 One of the steps required to increase the drilling speed of a drill press is to _______________.#658 Before boring a blind tapered hole, a good shop practice to follow is to _______________.#659 The action necessary to use the steering gear room trick wheel when transferring the steering control from the wheelhouse to local control is to _______________.