Question 657General Subjects - Assistant Engineer70% to pass
One of the steps required to increase the drilling speed of a drill press is to _______________.
AI Explanation
The correct answer is D) move the drive belt to a smaller diameter spindle pulley.
Increasing the drilling speed of a drill press can be achieved by moving the drive belt to a smaller diameter spindle pulley. This reduces the spindle speed, resulting in a higher drilling speed. The other options are incorrect because they do not directly affect the drilling speed - changing the terminal connections of the drive motor or using a larger diameter spindle would not increase the drilling speed, and moving the drive belt to a smaller motor pulley would actually decrease the drilling speed.
Related Questions
#655 Failing to decrease the feed pressure on a drill as its point begins to break through the bottom of the work piece will cause the drill to _______________.#656 Generally speaking, when using a twist drill to bore a hole in metal, the harder the metal, the greater the drill's required _______________.#658 Before boring a blind tapered hole, a good shop practice to follow is to _______________.#659 The action necessary to use the steering gear room trick wheel when transferring the steering control from the wheelhouse to local control is to _______________.#660 A command signal input to the steering gear has initiated rudder movement for 20° right rudder. The follow-up mechanism at the beginning of the rudder movement will _______________. Illustration GS-0123