Question 221General Subjects - QMED70% to pass
If you are hand tapping holes in cast iron, you should _______________.
AI Explanation
The correct answer is D) tap the holes without cutting oil.
When hand tapping holes in cast iron, it is generally not recommended to use cutting oil. Cast iron is a hard, brittle material, and the use of cutting oil can actually increase the likelihood of the tap breaking or the material cracking during the tapping process. Instead, tapping cast iron holes without any lubricant is the preferred method, as the friction and heat generated during the tapping process can help to clean and smooth the hole walls.
The other options are incorrect because: A) starting with a plug tap is not necessary for hand tapping, B) chamfering the edges is not required, and C) flooding the tap with mineral oil is not recommended for cast iron.
Related Questions
#219 The open end wrench size for a 3/4 inch American National Standard hex head machine bolt is _______________.#220 A pipe, or Stillson wrench functions best when _______________.#222 When internal threading for piping where the work permits the tap to be run entirely through you can begin and end the tapping of the hole by using a _______________.#223 If you are cutting external threads by hand and you start the die at an angle, the threads will _______________.#224 The proper tool used for cutting new external threads is called a thread _______________.