Question 361General Subjects - QMED70% to pass
If a lifeboat winch allows a lifeboat to descend to the water at an excessive speed, you should _______________.
AI Explanation
You are correct, the answer A) adjust the centrifugal brake mechanism is the correct response.
The centrifugal brake mechanism on a lifeboat winch is designed to control the descent speed of the lifeboat. If the lifeboat is descending at an excessive speed, it indicates that the centrifugal brake is not functioning properly and needs to be adjusted. Adjusting the brake mechanism will increase the braking force, slowing down the descent rate to a safe and controlled speed.
The other options are incorrect because they do not directly address the issue of excessive descent speed. Engaging the motor friction clutch bands, adjusting the davit-mounted limit switches, or removing unnecessary weight from the boat would not directly fix the problem of the lifeboat descending too quickly.
Related Questions
#359 Winch gears must be maintained in proper alignment to prevent _______________.#360 The hydraulic pump which would be mounted on the unit shown in the illustration, may begin to cavitate if _______________. Illustration GS-0118#362 The best method of fixing a winch motor bearing of the sealed type that is running hot is to _______________.#363 In the hydraulic anchor windlass system illustrated, if the power to the electric motor is on, but the wildcat turns slowly or not at all, even without a load being applied, and nearly normal pressure is indicated on the high side of the system, the probable cause is the _______________. Illustration GS-0160 #364 In the hydraulic anchor windlass system illustrated, if the power to the electric motor is on, but the wildcat does not turn, the pressure developed on either side of the system increases to half of the normal operating pressure regardless of the direction of movement in which the servo control is placed, the probable cause is the _______________. Illustration GS-0160