Question 415Motor Plants - Assistant Engineer70% to pass
After a long period of operation, a wear ridge, caused by piston ring action, will develop near the top of the cylinder liner. This ridge must be removed during maintenance in order to prevent_______________.
AI Explanation
The correct answer is D) breaking of the rings, ring lands, or both during piston removal.
The wear ridge that develops near the top of the cylinder liner is caused by the repeated action of the piston rings during engine operation. If this ridge is not removed during maintenance, it can prevent the piston from being removed easily, which can lead to the breaking of the piston rings or the ring lands (the areas between the rings). This is because the ridge can create a tight fit between the piston and the cylinder liner, causing excessive resistance during piston removal.
The other answer choices are incorrect because they do not directly address the issue of piston and ring damage during removal. Excessive ring wear, excessive lubrication, or improper lubrication coating are not the primary concerns when dealing with the wear ridge issue.
Related Questions
#413 Excessive side clearance between a piston ring and its groove will cause the ring to_______________.#414 If the compression rings on a diesel engine piston become stuck in the ring groove, the cause may be due to _______________.#416 When installing the bearing cap on the device shown in the illustration, which of the precautions listed must be observed? Illustration MO-0121 #417 What is the normal bearing clearance permitted at the horizontal axis of the shaft for the bearing shown in the illustration? Illustration MO-0121 #418 After following the prescribed procedures to measure the thrust bearing clearance shown in the illustration, the distance "F" is determined to be 200 mm, and 'f1' is 2.3 mm. Which of the following statements describes the condition indicated by these dimensions? Illustration MO-0121